Trundle bed twin are a good way to provide extra room for guests while saving space because the bed is designed to slide under an existing bed, full-size. When necessary, the wheels can be easily removed and used.
Instructions to make trundle bed twin: place the double mattress on the floor and measure the length, width and depth of the mattress. Measure the distance from the floor to the bottom of the bed. The mattress should be of at least 4-inch shorter than the height of the bed to be properly stored under.
12 Picture Gallery: How to Make Trundle Bed Twin
Measure and cut a piece of plywood to the base of the bed with wheels to the same measures of the double mattress. Do not add any more than half extra inch for the width or the length of the base. Measure and cut two pieces of wood of 2-inch by 4-inch. Cut two pieces of wood of 2-inch by 4-inch of the same length. Sand it with sandpaper. Build a rectangular frame on the basis compensated using the four pieces of wood.
Turn the base over and connect four wheels wheel on the bottom with screws. Place every wheel about a half inch from the edge of each corner. Turn over the base so that the wheels are resting on the ground. Place the frame completed above the base. Fix the frame to the base with heavy staples or nails. Finally, to make trundle bed twin, paint or stain the bed. Insert the mattress inside the frame and push it under the bed.
This post topic: Twin Trundle Bed