A loft bed frame can be constructed to maximize space by raising the high bed off the floor to use the space under the bed of a table or other furniture.
Instructions to build loft bed frame: measure the width and height of the room. Measure and cut two tables 6-by-8 to 78- inches in length. Measure and cut the third plate 6 by 8 in two pieces 37-inch long. Set the plates 6-for-8 to form a box. Ensure three 3-inch drywall screws at each corner where tables 6-by-8 meet.
12 Picture Gallery: How to Build Loft Bed Frame
Place the plywood sheet 4-by-8 on the box. Secure the plywood box with electric drill and 1-5/8-inch drywall screws to create the platform. Align the side posts 4-by-4 by side on the floor. Measure it from one end to a length of 44-inch and mark it. Place ruler on the mark and draw a line through each of the posts.
Set two of the four posts 4-by-4 vertically and 78-inch apart. Lift one end of the platform to the lines made. Make two holes through the boards of 6-by-8-inch drill two poles 4-by-4 with the drill and bit 1/4-inch. Finally, to build loft bed frame, insert the fastening bolts into the holes and tighten with the wrench.
This post topic: Frame Beds